Charge Controllers

Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.

Features:

• CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
• High quality & low failure rate components of ST and Infineon to ensure the product’s life Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%
• Maximum DC/DC transfer efficiency is as high as 98.6%★, full load efficiency is up to 98%★
• Advanced MPPT control algorithm will minimize the MPP loss rate and loss time
• The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
• The wider range of MPP operating voltage.
• Auto control system to limit the charging power & current go over the rated value.
• Support 4 charging options: Sealed, Gel, Flooded and User.
• Support the lead-acid and lithium batteries
• Real-time energy recording and statistical function
• Automatic over-temperature power reduction function
• Hundred percent full load operation in working environment temperature range within charging & discharging
• Support up to 6 units in parallel to expand system
• Load relay control external load switch signal to realize diversified load work modes
• The first and the second disconnection of load control, contain two relay’s contact
• Auto-control of utility and generator relay design
• Utility or generator auto-control relays make it easy to compose the hybrid power system
• The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage
• Isolated RS485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
• To monitor or set the parameters by using the phone Apps or PC software Tracer10415AN@48V system

TECHNICAL SPECIFICATIONS

Nominal System Voltage: 12/24/36/48VDC or AUTO

Battery Input Voltage Range: 8V~68V

Battery Type: Sealed(Default)/Gel/Flooded/User

Battery Fuse: 150A/58V

Rated Charge Current: 80A

Rated Charge Power: 1000W/12V;2000W/24V;3000W/36V;4000W/48V

Max. PV Open Circuit Voltage: 200V①/180V②

MPP Voltage Range: (Battery Voltage+2V)~144V③

Max. Conversion Efficiency: 98.5%

Full Load Efficiency: 97.5%

Self-consumption: 96mA/12V;60mA/24;50mA/36V;46mA/48V

Grounding: Common negative grounding

Dimension: 394x240x134mm

Mounting Dimension: 300x228mm

Mounting Hole Size: Φ7

Terminal: 2AWG/35mm2

Recommended Cable: 4AWG/25mm2

Weight: 6.1Kg

①At minimum operating environment temperature ②At 25℃ environment temperature ③The maximum PV open circuit voltage must never exceed 138V or 180V at 25℃ environment temperature